Guide: How to Bulletproof A Car - the Armormax Way (2023)

Table of Contents
Commercial Vs DIY: Materials: How to Bulletproof Your Car Door Body Tires Windows Drivetrain and Chassis Engine How To Make Your Car BulletproofBulletproofing your car doesn’t just mean covering it with armor; it can also include making it the very best inside and out with a lot of aftermarket upgrades. There are so many different ways in which you can do this, from literal bulletproofing of windows, tires, and doors to equally stylish and practical features such as floor mats, seat covers, and light blockers.Armoring passenger cars has become big business around the world from the Philippines to Pakistan to South Africa. With the increase in car jackings and kidnapping attempts, it is now as good of a time as ever to own an armored vehicle for safely traveling to and from your destination.Although automakers have tiptoed into the bulletproofing game—BMW, Mercedes-Benz, and for a time, Ford, have offered bulletproof versions of their products—the vast majority of cars are modified by aftermarket companies like International Armoring Corporation (IAC) and Armormax of Ogden, Utah with facilities around the world from Dubai to Nigeria to Ukraine, which has armored more than 10,000 vehicles since 1993. The company will make bulletproof cars with shocking door handles or have spikes that drop out of the car.Literal BulletproofingThere are many reasons why you might want to bulletproof your car. You could live in a bad neighborhood, or you may be preparing to take a trip through a dangerous region. You might just sleep better at night knowing that your car is protected out on the streets. Car theft did spike across the United States between January and May of 2020, as more cars were lining the streets unused. Apparently, vehicle larcenies increased by 63% in New York alone during this time. This is just cause for thinking more seriously about the general security of your car. Not only are more people investing in security systems, but another way to protect your car is to armor it. You can literally bulletproof your car by focusing on the following key features. Here’s How it is Done: Doors, Body, Floor, Roof, and InteriorThe first step is to remove all of the components from the car’s body (interior trim, wiring, carpet, seats, etc.). Then the doors and all other cavities (such as the pillars) are cut open so various materials can be stuffed or welded into those voids. Depending on the level of protection desired, the doors and pillars might be bolstered with steel plates, a combination of ballistic nylon and Kevlar (similar to the material in bulletproof vests), or both. If the doors get too heavy, a third hinge is added.The firewall and rear bulkhead can be steel-plated, too, but the floor and ceiling are generally lined with ballistic fabrics. The stock bumpers, designed to crumple and absorb energy during major impacts, can be reinforced to allow the armored car to, for example, bash through an improvised roadblock without damaging the radiator. The goal of armoring is also to make the car appear to be unmodified, inside and out.GlassIn the bulletproofing biz, glass is referred to as “transparent armor.” It is not a thicker version of the safety glass found in the side windows of standard cars but rather a sandwich of polycarbonate (a type of plastic) and leaded glass.The thinnest option—0.8 inch (21 mm) —will stop subsonic rounds such as those from the popular 9mm handgun, while the thickest glass—3 inches (74mm) —should emasculate rounds from a high-powered .30-06 rifle or AR-15 to even a .50 caliber round. If necessary, the electric window motors can be replaced by beefier ones to still allow the windows to be operable depending on how thick the glass is.TiresConventional run-flat tires can’t stand up to gunfire because bullets could shred the stiff sidewalls these tires rely on for support. Armormax uses a -military-grade composite rubberized RunFlat tire, which is a polymer donut custom-built for each application. It is clamped around the centerline of a wheel, inside the tubeless tire. If the pneumatic tire loses pressure, the polymer ring provides support that allows 60-mph speeds and between 30 to 60 miles (100 km) depending on the road terrain.Suspension and EngingeEven the lightest armoring adds at least 500 pounds to a large sedan. With the greatest level of protection for a large sedan adding 1400 pounds, it is necessary to modify the chassis and occasionally the drivetrain. To maintain drivability, damping and spring rates rise, and air springs slot in if needed. Most modern engines in large sedans have enough power to sufficiently cope with the extra weight, so engine modifications happen only if specifically requested by the customer. Three-quarter-ton trucks and SUVs are the only vehicles with underpinnings capable of bearing roughly 400 to 1,200 pounds of additional weight added with the highest level of protection without any modifications.Bulletproofing Your Car to Protect the AestheticMany people like to supe up their car to look as slick and cool as possible. They will add features such as spoilers, and change those like tire rims. Literally bulletproofing your car can cost several thousand dollars, but turning it into a top-tier vehicle is typically a much less expensive ordeal.Buy floor matsFloor mats can keep the inside of your car looking as fresh and new as the day you bought it. Anything you track in won’t ever touch the carpet and can be easily cleaned off. You can find specifically made mats for your car’s make and model, just like here with the Ford Fiesta Car Mats range at carandvanmats.co.uk.Depending on what you’re after, you may opt for carpet mats instead of rubber; these are harder to clean but definitely look better, so if the style is at the top of your list then you should look at some of these options.Floor mats can protect the interior of your car from dirt, debris from the street, spills, and stains. Anything that leaves a mark or even a bad odor can easily be removed and cleaned.Seat coversAnother simple way in which you can protect the interior of your car is to use seat covers. You’ll find ones that not only cover the driver’s and passenger’s seats, but the back seats as well; they’re a great idea if you have children playing or eating in the back, as they’ll keep your upholstery nice and clean. You can also find supportive seat covers, which look great and make your driving experience won’t.Extra protectionSome people like to waterproof their car seats with different kinds of fabric protection sprays or processes. This can help to keep the upholstery clean, but it takes a fair amount of effort to spray or cover the whole interior of your car. It can take a while to dry, and even longer for the smell to disappear.You can have this professionally done or do it yourself; either way, keep in mind that you might be smelling some pretty bad fumes for a while after. You may prefer to stick to seat coverings and floor mats, which will likely be cheaper than having it professionally waterproofed. Floor mats are also relatively inexpensive, and usually won’t cost you much more than around USD$70 for a set; for an example of prices and sizes, you can check out these floor mats for the ford fiesta.Blocking sunlightThis is a great tip—especially if you have leather seats. Protecting them from the sun also means protecting them from the heat. Having tinted windows or window coverings are great ways to keep both your cloth and leather in good nick; the sun can dry leather out, causing it to crack or tear, and excess sunlight may discolor your seats. You can find sun blockers at most auto stores, or even your local Walmart.Keeping it CleanEven if you do opt to use seat covers and floor mats, you’re still going to want to clean and check your car regularly for it to look and feel its best. Taking it to be washed every month or so will help to keep it clean, and keep the paint from chipping. In terms of the inside, cleaning out trash and vacuuming it regularly should be sufficient as long as you can avoid spills. Vacuuming not only cleans the floors or seats of your car, but also keeps the fabric and the carpet fresh, and helps to avoid that crusty, dry feeling of built-up dirt. It’s especially important to clean and vacuum your car during the summer, as crumbs can bake into your carpet and fabric in extreme heat. This often leaves behind a bad smell, and hard-to-clean areas.Bulletproofing your car doesn’t have to mean literally armoring your vehicle, though you can; there are many things to protect your car from—some that are very serious, and others that aren’t. Regardless, you can bulletproof your car from the inside out, and protect against whatever you track in on your shoes, messy children, or food stains. Your car deserves to be taken care of, and you can make sure that it stays in pristine condition by following the simple steps listed above.View a photo car gallery here. How To Make Your Car Bulletproof Literal Bulletproofing Here’s How it is Done: Doors, Body, Floor, Roof, and Interior Glass Tires Suspension and Enginge Bulletproofing Your Car to Protect the Aesthetic Buy floor mats Seat covers Extra protection Blocking sunlight Keeping it Clean FAQs Videos
Guide: How to Bulletproof A Car - the Armormax Way (1)

There are a lot of reasons why you may want to bulletproof your car. Maybe you are going to a dangerous trip, and you want to gear up your vehicle appropriately. Maybe you live in a dangerous area where the crime rate is very high, and there are regular cases of stolen vehicles, robbery, and even murder. Or maybe you just want a piece of mind where your car is considered to protect you and your family.

Whatever of the reasons may be, there’s no denying there’s currently a boom in the business of armoring up your vehicles. From people like you who are considered for their safety and vehicles to CEOs, politicians, and others who are constantly in danger, people are interested more in their safety, and bulletproofing your car is one of the ways to ensure that.

Hence, today, we’ll learn how to bulletproof your car.

Commercial Vs DIY:

While you could essentially buy a car like Bulletproof Bentley Continental that comes armored up from the manufacturer, it will legit cost a fortune compared to its non-geared-up counterparts. Even the cheapest commercially available models are substantially more expensive than a normal non-bulletproofed car.

VIEW GALLERY

Materials:

When looking for materials to bulletproof your car, only a few are up to the task that can actually be thin enough to fit inside a vehicle and stop the desired threats. Recommended options are Armormax, fabric consisting of ballistic nylon, steel, polymer, and armored glass.

The ballistic glass is definitely not your typical dinnerware but rather a specialized bulletproof to withstand greater compression, pressure when bullets would hit the car. The windows of the car are the most vulnerable part if you are ever to be attacked. So the usual formation to get any protection against that is an outer layer of bullet resistant glass with an inner layer of polymer plastic.

How to Bulletproof Your Car

Guide: How to Bulletproof A Car - the Armormax Way (2)

With the actual process, different parts of the car have different requirements. You cannot armor the tire the same way as the window of the vehicle for obvious reasons. Here is a part by part guide to armoring or bulletproofing your car:

(Video) Ballistic Demo Door Prop - Armormax South Africa

Door

This is probably one of the most accessible parts of the car. Since the vehicle becomes substantially heavy after being armored, you would need a heavy hinge for support. A steel hinge with at least 3 clasps is good enough of a start.

Body

The body of the vehicle can be encased with a ballistic standard steel-plated cover. The inside of the ceiling and the floors can also be encased with ballistic fabrics. The front could be extended to increase the shock bumper. They are effective shock absorbers, which can help to absorb energy during an accident or combat. However, these additions can be as inconspicuous as possible to let the attacker be unaware of the extra protection.

Tires

One of the most vulnerable parts of the vehicle, you may have watched in movies if not in real-life situations that people tend to shoot first at your tire to slow down and inevitably engage in combat later. According to the website Torquewrenchcenter.com when bulletproofing your car, your priority for the tires should be a modification in such a way that even after they are being shot, they are able to roll enough times to get away from the scene (see Armormax’s runflat options).

Bigger and more armored cars can use an onboard tire pressure control and sealing system while the smaller cars can rely on a composite flat run tire as the regular ones cannot handle gunshots.

Windows

As previously mentioned, bulletproofing or armoring the windows, which encompass a large fraction of your vehicle, is an important step when bulletproofing your car. Just a thicker version of safety glass is not enough when you want a fully armored car.

Usually, these can break under the specific compression from bullets coming at high speed. They are not even made to withstand against most of the high-profile car robberies. To bulletproof your windows, you must sandwich them with polycarbonate polymer on the inside and leaded glass on the outside. The thinner leader glass has a diameter of 0.8 inches, which is capable of stopping a bullet firing from a very popular 9mm handgun.

However, if you are not satisfied with that, you can also choose the thickest bulletproof shielding, which is about 2 inches thick. These can even stop a shot from a high-powered 0.30-06 rifle, which is one of the top graded combat weapons.

Drivetrain and Chassis

There is no point in armoring your vehicle if, at the end of the day, it cannot run. When you armor or bulletproof a vehicle, you add in a lot of extra weight to the vehicle. Even the lightest armoring can add up to a substantial 300 pounds on the vehicle as extra weight.

(Video) Bulletproof your own SUV

If you go all out, you can expect a minimum of 1,000 plus pounds of additional weight to the vehicle. With all these extra weights, the drivability of your vehicle may decrease if you don’t modify the chassis and the drivetrain according to the law of proportionality. Typically, you can modify them by raising the spring rates and damping as well as adding the air slots. That could essentially increase the drivability of the car.

Engine

While most of the present-age sedans have enough horsepower to pull through additional weight from the armor, it still is necessary to check if your vehicle’s engine can actually cope with it.

However, keep in mind that the more of your horsepower the vehicle has, it also consumes more gas. So if you live in a resource-scarce area, and you can see your car can handle the added load, it is recommended that you don’t modify the engines any further. Most of the SUVs and their engines can hold additional weight in the car. But if you don’t have any qualms about the usage of gas, we would recommend you to go the extra step and increase the horsepower to ensure the longevity of your vehicle.

How To Make Your Car Bulletproof

Bulletproofing your car doesn’t just mean covering it with armor; it can also include making it the very best inside and out with a lot of aftermarket upgrades. There are so many different ways in which you can do this, from literal bulletproofing of windows, tires, and doors to equally stylish and practical features such as floor mats, seat covers, and light blockers.

Armoring passenger cars has become big business around the world from the Philippines to Pakistan to South Africa. With the increase in car jackings and kidnapping attempts, it is now as good of a time as ever to own an armored vehicle for safely traveling to and from your destination.

Although automakers have tiptoed into the bulletproofing game—BMW, Mercedes-Benz, and for a time, Ford, have offered bulletproof versions of their products—the vast majority of cars are modified by aftermarket companies like International Armoring Corporation (IAC) and Armormax of Ogden, Utah with facilities around the world from Dubai to Nigeria to Ukraine, which has armored more than 10,000 vehicles since 1993. The company will make bulletproof cars with shocking door handles or have spikes that drop out of the car.

Literal Bulletproofing

There are many reasons why you might want to bulletproof your car. You could live in a bad neighborhood, or you may be preparing to take a trip through a dangerous region. You might just sleep better at night knowing that your car is protected out on the streets. Car theft did spike across the United States between January and May of 2020, as more cars were lining the streets unused. Apparently, vehicle larcenies increased by 63% in New York alone during this time. This is just cause for thinking more seriously about the general security of your car. Not only are more people investing in security systems, but another way to protect your car is to armor it. You can literally bulletproof your car by focusing on the following key features.

Here’s How it is Done:

Doors, Body, Floor, Roof, and Interior

The first step is to remove all of the components from the car’s body (interior trim, wiring, carpet, seats, etc.). Then the doors and all other cavities (such as the pillars) are cut open so various materials can be stuffed or welded into those voids. Depending on the level of protection desired, the doors and pillars might be bolstered with steel plates, a combination of ballistic nylon and Kevlar (similar to the material in bulletproof vests), or both. If the doors get too heavy, a third hinge is added.

The firewall and rear bulkhead can be steel-plated, too, but the floor and ceiling are generally lined with ballistic fabrics. The stock bumpers, designed to crumple and absorb energy during major impacts, can be reinforced to allow the armored car to, for example, bash through an improvised roadblock without damaging the radiator. The goal of armoring is also to make the car appear to be unmodified, inside and out.

(Video) James Bond like Bulletproof Car with Smoke Screen

Glass

In the bulletproofing biz, glass is referred to as “transparent armor.” It is not a thicker version of the safety glass found in the side windows of standard cars but rather a sandwich of polycarbonate (a type of plastic) and leaded glass.

Guide: How to Bulletproof A Car - the Armormax Way (3)

The thinnest option—0.8 inch (21 mm) —will stop subsonic rounds such as those from the popular 9mm handgun, while the thickest glass—3 inches (74mm) —should emasculate rounds from a high-powered .30-06 rifle or AR-15 to even a .50 caliber round. If necessary, the electric window motors can be replaced by beefier ones to still allow the windows to be operable depending on how thick the glass is.

Guide: How to Bulletproof A Car - the Armormax Way (4)

Tires

Conventional run-flat tires can’t stand up to gunfire because bullets could shred the stiff sidewalls these tires rely on for support. Armormax uses a -military-grade composite rubberized RunFlat tire, which is a polymer donut custom-built for each application. It is clamped around the centerline of a wheel, inside the tubeless tire. If the pneumatic tire loses pressure, the polymer ring provides support that allows 60-mph speeds and between 30 to 60 miles (100 km) depending on the road terrain.

Suspension and Enginge

Even the lightest armoring adds at least 500 pounds to a large sedan. With the greatest level of protection for a large sedan adding 1400 pounds, it is necessary to modify the chassis and occasionally the drivetrain. To maintain drivability, damping and spring rates rise, and air springs slot in if needed. Most modern engines in large sedans have enough power to sufficiently cope with the extra weight, so engine modifications happen only if specifically requested by the customer. Three-quarter-ton trucks and SUVs are the only vehicles with underpinnings capable of bearing roughly 400 to 1,200 pounds of additional weight added with the highest level of protection without any modifications.

Bulletproofing Your Car to Protect the Aesthetic

Many people like to supe up their car to look as slick and cool as possible. They will add features such as spoilers, and change those like tire rims. Literally bulletproofing your car can cost several thousand dollars, but turning it into a top-tier vehicle is typically a much less expensive ordeal.

  • Buy floor mats

Floor mats can keep the inside of your car looking as fresh and new as the day you bought it. Anything you track in won’t ever touch the carpet and can be easily cleaned off. You can find specifically made mats for your car’s make and model, just like here with the Ford Fiesta Car Mats range at carandvanmats.co.uk.

Guide: How to Bulletproof A Car - the Armormax Way (5)

Depending on what you’re after, you may opt for carpet mats instead of rubber; these are harder to clean but definitely look better, so if the style is at the top of your list then you should look at some of these options.

(Video) What's inside a BULLETPROOF CAR?

Floor mats can protect the interior of your car from dirt, debris from the street, spills, and stains. Anything that leaves a mark or even a bad odor can easily be removed and cleaned.

  • Seat covers

Another simple way in which you can protect the interior of your car is to use seat covers. You’ll find ones that not only cover the driver’s and passenger’s seats, but the back seats as well; they’re a great idea if you have children playing or eating in the back, as they’ll keep your upholstery nice and clean. You can also find supportive seat covers, which look great and make your driving experience won’t.

  • Extra protection

Some people like to waterproof their car seats with different kinds of fabric protection sprays or processes. This can help to keep the upholstery clean, but it takes a fair amount of effort to spray or cover the whole interior of your car. It can take a while to dry, and even longer for the smell to disappear.

Guide: How to Bulletproof A Car - the Armormax Way (6)

You can have this professionally done or do it yourself; either way, keep in mind that you might be smelling some pretty bad fumes for a while after. You may prefer to stick to seat coverings and floor mats, which will likely be cheaper than having it professionally waterproofed. Floor mats are also relatively inexpensive, and usually won’t cost you much more than around USD$70 for a set; for an example of prices and sizes, you can check out these floor mats for the ford fiesta.

  • Blocking sunlight

This is a great tip—especially if you have leather seats. Protecting them from the sun also means protecting them from the heat. Having tinted windows or window coverings are great ways to keep both your cloth and leather in good nick; the sun can dry leather out, causing it to crack or tear, and excess sunlight may discolor your seats. You can find sun blockers at most auto stores, or even your local Walmart.

Keeping it Clean

Even if you do opt to use seat covers and floor mats, you’re still going to want to clean and check your car regularly for it to look and feel its best. Taking it to be washed every month or so will help to keep it clean, and keep the paint from chipping. In terms of the inside, cleaning out trash and vacuuming it regularly should be sufficient as long as you can avoid spills.

Vacuuming not only cleans the floors or seats of your car, but also keeps the fabric and the carpet fresh, and helps to avoid that crusty, dry feeling of built-up dirt. It’s especially important to clean and vacuum your car during the summer, as crumbs can bake into your carpet and fabric in extreme heat. This often leaves behind a bad smell, and hard-to-clean areas.

Guide: How to Bulletproof A Car - the Armormax Way (7)

Bulletproofing your car doesn’t have to mean literally armoring your vehicle, though you can; there are many things to protect your car from—some that are very serious, and others that aren’t. Regardless, you can bulletproof your car from the inside out, and protect against whatever you track in on your shoes, messy children, or food stains. Your car deserves to be taken care of, and you can make sure that it stays in pristine condition by following the simple steps listed above.

(Video) How Durable is a BULLET PROOF Car?!

View a photo car gallery here.

FAQs

How do you bullet proof a car? ›

Recommended options are Armormax, fabric consisting of ballistic nylon, steel, polymer, and armored glass. The ballistic glass is definitely not your typical dinnerware but rather a specialized bulletproof to withstand greater compression, pressure when bullets would hit the car.

Can I bulletproof my own car? ›

Yes. Some vehicles, however, are more conducive to be armored than others. We have a portfolio of vehicles (see here) but can apply our armoring technology to almost any vehicle brand. Armormax® has patterns on over 80 different makes and models (from Range Rover to Tesla to Cadillac).

How much is an Armormax car? ›

Most clients spend around $40,000 USD to $90,000 USD on the armoring package. Others spend more on luxury or presidential builds on vehicles such as Range Rover, Maybach, etc. Due to the customization process that Armormax offers, the cost of each car is different.

How much does it cost to bulletproof a whole car? ›

Summary. The cost of bulletproof car windows varies depending on where you live. The price can range from $3,000 to $20,000. The price of the car window will depend on the size of the car, the style of the window, the material of the window, and the level of insurance coverage you have.

Can you roll down windows in a bulletproof car? ›

You can roll down the windows of some armored cars. Armored cars purchased by civilians typically have at least one window with roll-down capabilities (most likely the driver's seat window), whereas specialty vehicles may not.

How long does it take to bulletproof a car? ›

The armoring process depending on the package selected can take anywhere from 30 – 45 working days on a majority of vehicle models. International Armoring Corporation® is able to accomplish this due to the volume of vehicles being armored and by keeping in stock armor components for most of the popular luxury vehicles.

Are armored cars safer in a crash? ›

A heavily armored vehicle with proper reinforcement, armor plating, and perfect welding procedure has more chances of surviving an accident. Armored vehicles are safer at low speed during accidents because of not having crumple zone to absorb energy at high speed.

How much does it take to armor a car? ›

The cost of bulletproof protection depends upon the level of protection it comes in. It can start from around $14,000 and exceed $100,000 based on the customization you'd like to have on your car. Some civilian armored cars may also be bespoke vehicles with no standard equivalent.

Can a normal person buy bulletproof car? ›

Can you buy an armored car? It is completely legal and ethical to buy an armored car from the best armored car companies out there.

How many bullets can a bulletproof car take? ›

For instance, if you were to get level 1 protection, it would be able to protect you from a minimum of 3 shots from a 9 mm handgun. That's regardless of the material you choose. On the other hand, level 2 protection means that the glass is able to withstand at least three . 357 Magnum shots.

What is the cheapest bulletproof material? ›

Ballistic Fiberglass

It is the most cost-effective and convenient option for bulletproofing walls.

Can you buy bullet proof tires? ›

Technically there is nothing like bulletproof tire, but there are tires resistant with rubber or metal band inside. There are some other tires having an insert around the inside of the rim to provide control and degree of traction when the tire is shredded.

How much does it cost to put bullet proof glass in a car? ›

If you want to have a professional install your bulletproof window, there is a huge range of costs. If you want the minimal amount of protection, you can expect the cost to be between $3,000 to $5,000. A higher level of protection will cost you between $15,000 to $20,000.

How much weight does armor add to a car? ›

Depending on what protection level your vehicle has been retrofitted for and how comprehensively or certifiably it was armored, its final weight could be 800 to 2,000 pounds heavier than the standard unarmored version.

Can brick stop a bullet? ›

Most household objects won't reliably stop a bullet. Bullets easily puncture most walls, doors, and floors. However, brick, concrete, and cinder blocks effectively stop most common calibers.

What destroys bulletproof glass? ›

Shoot an explosive round to break multiple layers of thick bulletproof glass. As their name suggests, military-grade explosive rounds detonate on impact and will shatter the object they're fired into. This type of super high-power ammunition will break through even the thickest 5-pane bulletproof glass.

How thick is bulletproof glass for cars? ›

The index of refraction for all of the glasses used in the bulletproof layers must be almost the same to keep the glass transparent and allow a clear, undistorted view through the glass. Bulletproof glass varies in thickness from 3⁄4 to 31⁄2 inches (19 to 89 mm).

How thick does metal need to be for bulletproofing? ›

To these standards, some materials are natively “bulletproof”: a foot-thick concrete wall or two inches of solid steel will withstand many shots from a handgun, sub-machine gun, or rifle.

How long does bulletproof last? ›

The majority of NIJ-certified body armor vests can maintain their ballistic capabilities for a minimum of five years. There are some Dyneema body armor vests that have a seven-year ballistic capability.

What is the highest level of bulletproof car? ›

The strongest protection often offered, the B7 protection level stops various armor-piercing rounds fired from super high-velocity rifles, even sniper rifles. This is in many cases the highest feasible protection available within civilian-grade armored vehicles.

What is the most unsafe vehicle on the road? ›

Between 2017-2019, the F-150 alone has the most number of fatal crashes in five states: Colorado, Florida, Georgia, Nevada, and Utah. No wonder it tops the list of the most dangerous cars.

How often do armored cars get robbed in the US? ›

According to the FBI, about 25 to 35 armored trucks and drivers are robbed each year, compared with about 4,000 banks. Banks are hit more often because criminals know that armored car robberies are far more dangerous: Unarmed bank tellers are trained to fork over the cash with no questions asked.

Can you use Armor All inside of car? ›

Armor All® Protectant products are safe to use on your car's dashboard, and will not cause cracking. In fact, Armor All® Protectant products are specially formulated to guard against UV damage (like cracking and discoloration).

Does Armor All damage car paint? ›

Armor All® Protectant is not designed for use on paint. Although the product will not harm your car's paint finish, it may leave a dull or streaky appearance. For best results on paint, try using Armor All® Car Wash.

Can you bulletproof any engine? ›

You could do your own bulletproofing by investigating problem areas of the engine and improving parts. This is commonly done with the water pump, EGR cooler, external oil cooler, and the FICM with higher quality parts. However, true bulletproofing uses parts specifically manufactured by Bulletproof Diesel.

What are the levels of bulletproof cars? ›

The NIJ offers 8 classifications of protection, including Class I, IIA, II, IIIA, III, IV, V, & VI.

What are bullet proof cars called? ›

A VIP armored car is a civilian vehicle with a reinforced structure that is designed to protect its occupants from assaults, bullets and blasts.

Can a bullet go through a bulletproof window? ›

It is designed to withstand one or many rounds of bullets depending on the firing weapon and the thickness of the glass. Bulletproof glass reduces the velocity by absorbing the energy from the bullets. However, it is not fully impenetrable.

What material can a bullet not penetrate? ›

Common bulletproof materials include:
  • Steel. Steel bulletproof materials are heavy duty, yet at just a few millimeters thick, extremely effective in stopping modern firearm rounds. ...
  • Ceramic. ...
  • Fiberglass. ...
  • Wood. ...
  • Kevlar. ...
  • Polyethylene. ...
  • Polycarbonate.

What bullets will penetrate body armor? ›

However, any bullet – small or large – that travels at a high rate of speed will get through body armor. Huge handgun rounds such as . 44 Magnum and . 45 ACP will travel at slower speeds, which allows the body armor to stop them.

Is anything better than Kevlar? ›

Twaron is an extremely popular alternative to Kevlar. This product is tough, light, and resistant to harmful chemicals and high temperatures. It is often chosen for its ability to make ordinary products unbelievably durable. Twaron, generally, has the same chemical structure as Kevlar.

Are cop car tires bulletproof? ›

No, they are still not bulletproof – but they are markedly more fuel-efficient.

Are police cars bulletproof? ›

In North America, generally speaking, no. However, some patrol cars are available with a factory installed option for ballistic protection in the doors (not the windows) - the Ford Police Interceptor being one.

Do armored cars have special tires? ›

While car manufacturers and armored car specialty companies offer several levels of protection from a variety of arms, all of them equip their vehicles with bulletproof tires.

Are bullet proof cars safer in a crash? ›

A heavily armored vehicle with proper reinforcement, armor plating, and perfect welding procedure has more chances of surviving an accident. Armored vehicles are safer at low speed during accidents because of not having crumple zone to absorb energy at high speed.

What vehicles are bullet proof? ›

  • Mercedes-Benz S-Guard 600. Mercedes-Benz S-Guard 600 is one of the most common armored vehicles available for civilians. ...
  • Audi A8 Security. ...
  • Cadillac Escalade. ...
  • Bulletproof Lexus LX 570. ...
  • Genesis G90 Sedan. ...
  • Bulletproof Dodge Charger Hellcat. ...
  • Bulletproof BMW 750i. ...
  • Ford F150.
Jul 7, 2022

Do bullets go through car doors? ›

That same . 223 round easily penetrated car doors and wheels at distances up to 100 yards. A shot from a . 45 handgun at a distance of 15 yards penetrated a car door.

What is the safest spot in a car? ›

The safest place in the vehicle is the centre of the back seat, being positioned the furthest point away from any possible point of impact. Some older vehicles do only have a lap belt so it is essential to check that your seat is suitable for one of those.

What is the safest thing in a car? ›

Here's a rundown of some basic safety gear.
  • Airbags. Front airbags have been standard on all new cars since 1998 and light trucks since 1999. ...
  • Antilock brakes (ABS) ...
  • Traction control. ...
  • Electronic stability control. ...
  • Safety-belt features. ...
  • Newer safety features - accident avoidance systems. ...
  • Tire-pressure monitors. ...
  • Telematics.

What is the most unsafe car in a crash? ›

Between 2017-2019, the F-150 alone has the most number of fatal crashes in five states: Colorado, Florida, Georgia, Nevada, and Utah. No wonder it tops the list of the most dangerous cars.

How much does it cost to Armour a car? ›

The cost of bulletproof protection depends upon the level of protection it comes in. It can start from around $14,000 and exceed $100,000 based on the customization you'd like to have on your car. Some civilian armored cars may also be bespoke vehicles with no standard equivalent.

How long does BulletProof last? ›

The majority of NIJ-certified body armor vests can maintain their ballistic capabilities for a minimum of five years. There are some Dyneema body armor vests that have a seven-year ballistic capability.

What is level 6 BulletProof? ›

UL 752 Level 6 Specifications

Most commonly used as a protection barrier against multiple shots from a submachine gun, such as a 9 mm Uzi, and the like, with muzzle energy of 540-653 foot-pounds (732-885J). Nominal Thickness. 3/8"

Will bullets go off in a hot car? ›

Ammunition Can Be Damaged in a Hot Car

Storing ammo in a car isn't likely to set it off. Bullets have to get up to around 400 degrees before they start spontaneously discharging. However, even though your ammo isn't likely to be set off, it can still be damaged by high heat.

What material can bullets not go through? ›

They may be complex, such as Kevlar, UHMWPE, Lexan, or carbon fiber composite materials, or basic and simple, such as steel or titanium. Bullet resistant materials are often used in law enforcement and military applications to protect personnel from death or serious injury.

What is the cheapest bullet proof material? ›

Ballistic Fiberglass

It is the most cost-effective and convenient option for bulletproofing walls.

Videos

1. Armormax Bulletproof Dodge Charger Hellcat AWD – Everything You Need to Know!
(Marspeed)
2. Armoured Cars: Get The Ultimate Protection For Your Every Move
(Armormax South Africa)
3. Fully Armored SUV Bulletproof GMC
(Edwin Sarkissian)
4. ARMORMAX® Installation
(ACFenvironmental)
5. How to Buy an Armoured Car in SA
(Armormax South Africa)
6. After Care for Armoured Vehicles
(Armormax South Africa)
Top Articles
Latest Posts
Article information

Author: Corie Satterfield

Last Updated: 03/02/2023

Views: 5349

Rating: 4.1 / 5 (62 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Corie Satterfield

Birthday: 1992-08-19

Address: 850 Benjamin Bridge, Dickinsonchester, CO 68572-0542

Phone: +26813599986666

Job: Sales Manager

Hobby: Table tennis, Soapmaking, Flower arranging, amateur radio, Rock climbing, scrapbook, Horseback riding

Introduction: My name is Corie Satterfield, I am a fancy, perfect, spotless, quaint, fantastic, funny, lucky person who loves writing and wants to share my knowledge and understanding with you.